NQuire 1000 II
Features
Fully functioning CIT system.
With Octa-Core Cortex-A53 CPU up to 1.5GHz.
Easy to install and use anywhere.
Ideally suited for shelf mounting or on-counter usage in department stores, supermarkets, small grocery stores, pharmacy/cosmetic stores, tobacco kiosks and more.
Snappy reading performance.
Armed with Newland’s CM6x, 2D megapixel barcode scanner. The engine has a 20 degree scan angle for comfortable scanning of larger products. Also, available without a scanner.
Easily build applications.
The NQuire 1000 II is built on Android 7.1, allowing for easy development of custom applications, tailored to your needs.
Highly customizable with a broad range of features.
Dual band WiFi, Bluetooth embedded, front 5Mp camera, POE, speaker.
Variety of accessories.
The NQuire 1000 II offers a variety of optional accessories, including a Foldable desktop stand, VESA magnetic shelf stand and VESA wall mount. Additionally, optional modules for 4G, MSR, NFC and low frequency RFID help extend and tailor communication and data capture possibilities even further.
Modules can only be ordered pre-mounted to the connector on the left or right side.
Suggested industries
Retail
Hospitality
Manufacturing
Healthcare
Industrial
NQuire 1000 II
Technical specifications
| 1D | All major 1D symbologies |
| 2D | All major 2D symbologies |
| Image Sensor | CMOS 1280*800 |
| Aiming | Laser diode (625±10 nm) |
| Illumination | White LED (625±10 nm) |
| Scan Modes | Sense Mode |
| Scan Rate | 60 frames per second |
| Operating System | Android 7.1 |
| Processor | RK3368, Octa-core Cortex-A53; up to 1.5 GHz , PowerVR G6110 GPU; up to 600MHZ |
| Memory RAM | 2GB DDR3 |
| Memory Flash | 8GB Emmc |
| Audio | 1x 3.5mm Headset + MIC jack, 2x Integrated speakers 8Ω / 1.3W |
| Audio Jack | 3.5mm earphone |
| Buttons | (Vol+ / Vol-) / (Up / Down) / Exit / Power switch |
| Camera | Front: 5.0 MP camera |
| Dimensions (mm) | 252 × 184 × 33mm |
| Display | 10.1” WXGA, 1280*800 TFT LCD display |
| Expansion Slot | SD card |
| Input Voltage | DC12V±5% |
| Interfaces | USB 2.0 port, type A port, GPIO port |
| Material | PC, ABS |
| Pogo Pin | 2x POGO-Pin connector |
| Power over Ethernet | RJ45 Ethernet, 10/100/1.000BASE-T |
| Power Supply Input | DC12V, 2A |
| Power Supply Output | AC100~240V, 50~60Hz |
| Sensors | G Sensor |
| Touch Panel | 10 points Capacitive Touch |
| VESA standard | Metal Fitting mounting screw holes: 75*75 mm |
| Video | MKV, TS, FLV, AVI, VOB, MPG, DAT, ASF, RM, MOV, 3GP, MP4, WMV |
| Weight | 615 g |
| WLAN RADIO | IEEE 802.11 b/g/n/ac (2.4G)，IEEE 802.11 a/b/g/n/ac (5G) |
| WPAN RADIO | Bluetooth 4.1 |
| RFID | Optional |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Humidity | 5% to 90% (non-condensing) |
| IP Rating | IP54 (front only) |
| Standard | Multi-plug AC/DC adapter with power cord, adjustable wall mount bracket Vesa75 |
| Optional | 4G module, magnetic card reader module, NFC reader module, RFID reader module, desktop stand Vesa75 |
| MDM (certified) | Ndevor, SOTI, Airwatch |
| Terminal Emulation (compatible) | IVANTI |
| Configuration Tools | Ndevor |
| Hardware | CE, FCC, RoHS |
| Standard | 2 years |
